- Oh no! An error has occurred!
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
- You need to be logged in to do that.
-
Coinciding with the acquisition of VIA Development, Nate joined Autodesk in March of 2003 after a decade stint as an entrepreneur following a two-decade stint as a controls engineer and software applications developer at Owens-Corning. Nate is now the lead product architect for AutoCAD Electrical. He loves this stuff.
-
Switching Between Standards - AB Journal article
May 2, 2007, 03:44 PM Nate HoltHere is an AutoCAD Electrical article that appears in this month's issue of the Allen-Bradley "The Journal". It is entitled "Schematic Standards Get a Flip - ...aid in internation documentation."
http://literature.rockwellautomation.com/idc/groups/literature/documents/br/5058-br101_-en-p.pdf#page=43
The article had a screen-shot showing the source code for a little Lisp utility. Didn't plan on it being printed so small. Here's the original version:
You must be logged in to post a comment.