Service Pack 1 is now available

• Add to Bookmarks Send to Peer

  Service Pack 1 is now available
  September 25, 2006, 07:32 PM Andrew de Leon

  That's right, it's available. Service Pack 1 for AutoCAD Mechanical 2007 and Mechanical Desktop 2007 are now available for download from Autodesk's Support web site. Here are the links:
  
  AutoCAD Mechanical 2007
  http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=8112912&linkID=4198948
  
  Mechanical Desktop 2007 (installed as part of Autodesk Inventor Series 11)
  http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=8113081&linkID=4183232
  
  Mechanical Desktop 2007 (installed as part of Autodesk Inventor Professional 11)
  http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=8113052&linkID=4183232
  
  Mechanical Desktop 2007 (installed as part of Autodesk Inventor Professional for Simulation 11)
  http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=8113016&linkID=4183232
  
  Mechanical Desktop 2007 (installed as part of Autodesk Inventor Professional for Routed Systems 11)
  http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=8112993&linkID=4183232
  
  Service Pack 1 includes AutoCAD 2007's Service Pack 1 so you don't need to worry about installing anything else. Just make sure you download the right one based on your installed product, otherwise, before the installation gets too far you'll get a message telling you that you haven't installed the product you use everyday...
  
  - Andrew
  
  

  2 Comments | Add Comment >

Comments

• 

  October 30, 2006 07:44 PM George Dimitriou

  AutoCAD 2007 and consequently ACADM 2007 should be Unicoded. We have a very serious problem when running ACADM 2007 using Greeck Regional Settings, here in Greece. We should change Regional Settings to English US in order to be able openning the Content Libraries. This is a work arround we discovered alloned because Autodesk Support told us they don't support local vesrions of Windows. The problem occures in English version of Windows also. Unfortunatelly they haven't fix this problem in SP1. Any good advice would be acceptable.

• 

  November 7, 2006 01:22 PM Andrew de Leon

  Hi George, can you try this work around. Close AutoCAD Mechanical and open the file