Benefit From This Software Tutorial Library

• Send to Peer Comment Add to bookmarks

  Posted November 8, 2007

  by Community Admin1
  Synergis Engineering Design Solutions (EDS) now offers a free, online Autodesk manufacturing software tutorial library. The library will have tutorials about Inventor, Autodesk Mechanical, and AutoCAD software, and the content will be updated each month. Find out more about this online library. (Free registration may be required to read the article.)

  http://www.inventorconnections.com/feature_full.php?cpfeatureid=23582

  7 Comments | Add Comment

  • 1
  • 2
  • 3
  • 4
  • 5

Comments

• 

  May 13, 2008 09:15 PM Angel Abad Perez

  I am trying to drill a hole in a cilinder not in the face but in the curved area, but is imposible. some one can help? Thank you.

• 

  May 13, 2008 09:15 PM Nat Bravata

  Hi, I have seen this on a tutorial, but not know where. Do a google search. Other than that try to create a new work plane then sketch on that and either project the hole on to surface or extrude the sketch into it. HTHs I am a learn still.

• 

  May 13, 2008 09:15 PM William Shipman

  To drill a hole into a curved surface you need to first determine what type of hole be it counter bored or thru. To form a thru hole turn on your plane in the origin folder and offset a work plane to the circumference and place the desired circle for a thru hole constrained to projected geometry. Place a point on projected geometry to place a counter bored hole. Locate geometry or a point with construction lines from projected geometry.

• 

  December 26, 2007 01:37 PM IVAR HERNANDEZ

  I do analicis stress over a piesa to look into an ensemble.

• 

  February 9, 2008 02:23 PM Mike Kowal

  Dear Angel, Did you try creating a work plane on the curved surface? You can reference new work planes off of the primary X,Y,Z axes. You can then drag them where you want, and/or specify an offset distance and angle.

• 

  February 12, 2008 01:08 AM Stewart Long

  The best way is to select the curved face and then select a origin plane parallel to the plane you want created. This will automatically create a workplane on the circumference for you to create a sketch on.

• 

  April 11, 2008 04:19 PM Steven White

  add a user work plane paralell to the curved surface on the xy, axis or zx etc. then make a sketch on that workplane, add the geometry for the cylender, add a circle the size and position of the hole and extrude it thru the shape, using the extract feature.